Wanhao PLA Specifications:
Lower melting point and better smell than ABS, flow rapidly, not blocking the nozzle;
3D Filament PLA ,
1.Lower melting point and better smell than ABS, flow rapidly, not blocking the nozzle;
2. PLA Filament has small shrinkage even when printing big size model.
3. Dimensional accuracy ± 0.1mm with laser monitor and interlock device,smooth surface,no bumps,no break,high hardness.
4. Wide colors seletion: natural,red,green,yellow,blue,black,purple,grey,orange+++
5. Packing: 1kg
Parameters as below:
|
Parameter |
Unit |
PLA 1.75mm |
|
Density |
g/cm3, 21.5°C |
1.25 |
|
Melt Flow Index |
10min,2.16kg |
5 |
|
Print temperature |
°C |
170-190 |
|
Yield Strength |
5mm/min |
45 |
|
Impact Strengh |
KJ/m2 |
5 |
|
Accuracy |
– |
2.90±0.1mm, 1.70±0.1mm |
|
POLYMER PROPERTIES |
PLA COLOURED |
PLA TRANSLUCENT |
|
Print temperature |
190-225 oC |
190*220 oC |
|
Raft temperature |
190 oC |
190 oC |
|
First layer temperature |
200 oC |
200 oC |
|
Print base material |
MDF/Acrylic/PLA |
MDF/Acrylic/PLA |
|
Raft required |
Optional |
Optional |
|
Filament diameter |
3mm/1.75mm |
3mm/1.75mm |
|
Spool N.W |
1kg/1kg |
1kg/1kg |
Produktanmeldelser
Ingen produktanmeldelser enda.