Raise3D Pro2 Plus– Høy kvalitet & pålitelig dobbelt-dyse Printer
Raise3D står for produksjon av høy kvalitet, pålitelig og rimelig 3D-skrivere. Bli med på additiv Produksjon nå. Realisere imponerende resultater raskt med Raise3D Pro2 Plus Dual Extruder .
Med denne 3D-skriveren kan du produsere små serier og prototyper. Velg Raise3D for rask og kostnadseffektiv additiv produksjon.
- the double extrusion print head
- the end of filament optical sensor
- the new magnetic and removable tray
- the improved ventilation system
- the wifi connection
- the touch screen 7 inches
Electronically controlled extrusion head change
Second Generation Power Loss Resuming
Never lose a print.
“I actually knocked off the power accidentally when i hit the cord when I was vacuuming, I was currently doing a 96 hours print with only 2 hrs left. As I raised my head to scream in terror, I turned back on the machine and it asked me to continue print…THIS WAS A LIFESAVER”
by Shon Robinson

Wide range of compatible materials, up to 300 ° C
PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA
PP / Reinforced Glass Fiber / Reinforced Carbon Fiber
Filament Wood / Filament Metal
High Precision – Layer Height 0.01mm
Unique motion system for superior print quality and resolution.
Unparalleled layer resolution – layer height 0.01 mm (10μm)
Interchangeable nozzles – 0.2 mm nozzle for finer X / Y point placement
Accurate positioning – 0.78125 micron positioning resolution on the X / Y axis
Prints even the most complex projects, even at high speed. Possibility of multi-material and multi-color prints.
High repeatability. (<0.005 m, 5 micrometers).
Speed of light,<1 second switching time.
Lifting distance of 1.5 mm, compatible with flexible filaments.
Reliability test validated more than 100,000 times.
Need advice or more information? Our team is at your disposal forguide you in your choices throughout your purchases.
Do not hesitate to contact us, nWe are at your disposal for any further information or advice!
Large Print Volume
Reliability guaranteed 24/7 thanks to the high-strength aluminum frame.
Integrated 7-inch touch screen
Wi-fi Connection Control and Impressions
Work effectively with ideaMaker by wirelessly connecting to your Pro2 Series printer.
Integrated camera.
New Generation Motion Controller
Maximum reliability. Ultra-precise current control. Silky and smooth movement. Superior thermal performance.
400MHz ARM Cortex-M7 32bit RISC FPU.
Industrial grade components.
Autonomous motor driver.
256 step stepper motor
New extruder with end of filament sensor
Better grip. No slips. Safer impressions.
Two speed drive.
4 times more torque.
Fluid and sensitive, optical output sensor: change the coil before making air print.
New HEPA filter
Eco-friendly, suitable for an office environment.
Silently protect your health.
Absorbed>91% of the particles.
New Heating Tray System
Excellent prevention of warping (lifting of the ends of the first layers)
Equal distribution of heat
Extended life
Stable and easy to use.
Material of aerospace quality.
High temperature silicone heating bed.
Magnetic bed in aluminum.
4 + 9 point locking system improved.
Technical sheet:
GENERAL | Printing Technology: FFF (Filament Filament Deposition) Building Volume (L × W × H): – Printing with an extrusion nozzle: 305 × 305 × 605mm – Printing with two extrusion nozzles: 280 × 305 × 605 mm Machine size (L × W × H): 620 × 590 × 760 mm Print head: Double head with electronic lifting system Diameter of the filament: 1.75mm XY axis pitch size: 0.78125 micron Z axis pitch size: 0.078125 micron Movement speed of the print head: 30 – 150 mm / s Printing plate: aluminum heating plate with magnetic hold Maximum temperature of the tray: 110 ºC Tray Material: Silicone Plate Calibration: Pre-Calibrated Upgrade Supported Materials: PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / Fiberglass Reinforced / Carbon Fiber Reinforced / Filament Wood / Filament Metal Nozzle diameter: 0.2 / 0.4 / 0.6 / 0.8 mm Maximum nozzle temperature: 300 ºC Connectivity: Wi-Fi, LAN, USB port Surveillance: live connected camera Volume in operation: 50 dB Operating temperature: 5-35 ºC |
ELECTRIC | Power input: Universal 100-240 VAC, 50/60 Hz Power output: 600 Watts, 24 VDC |
SOFTWARE | Slicer / Slicer (cutting software): ideaMaker Supported file types: STL, OBJ Operating system supported: WINDOWS / IOS / LINUX Machine code type: GCODE |
CHECKING THE PRINTER
|
User interface: 7 inch touch screen Network: Ethernet 802.11b / g / n Wifi 2.4GHz / 5GHz Resume printing after a power failure: second generation Screen Resolution: 1024 * 600px Motion Controller: ARM Cortex M7.400MHZ FPU Logic Controller: Freescale imx6, ARM Quad Core 1Ghz Processor Memory: 1 GB Built-in Flash: 8GB OS: Embedded Linux Ports: SD Card * 1, Usb2.0 * 2, Ethernet * 1 |
Omtaler
Det er ingen omtaler ennå.